GM Volt Forum banner

Any tips on wiring for a 240V charging station?

2520 Views 7 Replies 8 Participants Last post by  Loboc
I am currently dragging an extension cord across the driveway to charge my 2017 Volt at 120V. I have been working with an electrician to do something more permanent, bearing in mind that I will want to do 240V in the near future.

Are there electrical code gotchas my electrician and I need to know? I was thinking of a 240V/30A dryer-type receptacle in some kind of weatherproof enclosure at the corner of my porch. I was going to make a wooden box big enough to house the receptacle and the charger.

I tried to read the electrical code myself (NEC Article 625), but it's pretty tough reading. At least I know the driveway has adequate ventilation! (625 spends a lot time talking about ventilation)

Thank you. I'm a new member of the forum, and my search queries didn't seem to find an old post that addresses this.

Charles H.
Raleigh, NC
1 - 1 of 8 Posts
If it's out in the weather, I would hard wire it. Save money on the plug, socket box etc. Find a level 2 EVSE with a nice long cord. You may only need a double pole 30amp breaker, a chunk of 10 gage wire, and the Level 2 EVSE of your choice.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.