GM Volt Forum banner

Windscreen wiper question- sweeping water back onto the windscreen

4517 Views 9 Replies 7 Participants Last post by  Dutch
Hi,

We've had our volt for a few years now, and we've noticed at consistently when we're using the windscreen wipers and there's plenty of rain being swept from the glass, both blades seem to pull the water back onto the windscreen after sweeping the water to the edge. It's often that after the blade moves back from the edge of the windscreen to return to the centre of the glass to sweep again, about 6 inches wide or more of water is pulled back towards the drivers field of view, and also the same on the passenger side.

It's rained so infrequently here over the last year that I'd forgotten about it for awhile, but my wife mentioned it to me again today, and we're wondering if it's an adjustment, or if they're all just like that.

Does anyone have any thoughts? I've had a look through the forum and I couldn't find any other posts raising the issue.

Thanks,

craby
1 - 1 of 10 Posts
Does it do it with new blades as well? The only adjustment that can really be made is to bend the wiper arm so it applies more pressure against the glass. That said however, the metal arm portion of the volt wiper arm is quite short, and pretty stiff unlike older cars, so not sure you can really do much there. My best suggestion would have to be blade replacement.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top