GM Volt Forum banner

Width of phone charging cavity

1599 Views 3 Replies 3 Participants Last post by  gmasters
Just picked up my 2017 Premier, and discovered that my phone - a Nexus 6 with wireless charging - will NOT FIT in the designated slot.

I removed the rubber sleeve, and it's close but no cigar.

Has anyone milled away material on the sides of that cavity, to enable a large-screen phone to fit? And if so, what is the distance from the top to the center of the Qi coil? It would be useless to make changes to the original plastic, just to learn that the cavity isn't deep enough.
1 - 2 of 4 Posts
One wireless solution for larger phones is to put a conventional Qi-compatible plate in that forward cavity, connected to the existing USB port.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.