GM Volt Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
524 Posts
The manual shows hooks on the straps for the holes in the torque box for pulling from the front. Holes are 1 and a half inch diameter. I would think the same hooks would be used for pulling from the rear. The slots in the rear trailing arms are about 1 and one quarter inch by 3 inch. The trailing arms are visible thru the rear wheel opening in front of the rear tire. The straps don't have to go thru the openings in the trailing arms. The straps can wrap around the trailing arms. The manual is just trying to say avoid pulling on the transverse torque tube because the center is weak. Looks like any straps would wrap around the trailing arms. Manual also says pulling from the front is preferred. Good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top