GM Volt Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,311 Posts
Has anybody else tried to determine battery status by looking at CAN data?
MyGreenVolt and Torque Pro are two apps available for use with a blue-tooth enabled OBD reader that provide both raw and useable SOC % readings for the Volt owner. Perhaps one of those apps will help you. Both are available for the android platform, not sure about other platforms. According to both of them, the full charge raw SOC on my 2012 Volt is ~87%, which is what I expected to find. I don’t use an OBD reader much, and rarely fully deplete my battery. On a couple of times when I did, the raw reading was ~ 22% when the switch to ICE was made because the battery was depleted, but by the time I arrived home, the reading was closer to ~20%.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top