GM Volt Forum banner

Replacing Third Brake light, how?

4249 Views 6 Replies 4 Participants Last post by  Ryan IL
The third brake light that is located on the tail gate of my 2012 has broken. I'm thinking of replacing it, but I can't find any information about how to get it off. It appears to have little plugs that cover the screws? Anyone tackle this yet? Any tips? Sources? Thanks in advance.
Here's a link to what I'm thinking of purchasing. If I can find a used one I would like to do that as well.

https://www.gmoutletparts.com/oe-gm...JVXRy7V21fj0ya6iqqbvoZlE1G3-Qmwy9oaAsix8P8HAQ
1 - 1 of 7 Posts
Overview:
Open hatch
Remove liftgate lower trim finish panel
Disconnect high mount stoplight electrical connector from main liftgate harness

Details:
With hatch up and looking at the bottom of the high mount stoplight, remove the two high mount stoplight access hole covers (one on left, one on right)
Remove the now uncovered screws
Remove high mount stoplight and wire harness from the spoiler.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top