GM Volt Forum banner

Repair of Circuit Board of an EVSE

3635 Views 12 Replies 6 Participants Last post by  EVDoctor4Earth
I have an EVSE whose internal Circuit Board is beginning to fail. The overseas manufacturer will send me a new board for free and they are offering to pay for the cost of having a repair shop stateside put in the new board and I guess solder it back together. Does anybody know of a shop that would do that kind of thing? My other option is to send the entire unit back, but the shipping cost will be high and it will take a good while. Any ideas? thanks


Sent from my iPhone using Tapatalk
1 - 1 of 13 Posts
I have an EVSE whose internal Circuit Board is beginning to fail. The overseas manufacturer will send me a new board for free and they are offering to pay for the cost of having a repair shop stateside put in the new board and I guess solder it back together. Does anybody know of a shop that would do that kind of thing? My other option is to send the entire unit back, but the shipping cost will be high and it will take a good while. Any ideas? thanks


Sent from my iPhone using Tapatalk
How to Repair All EV Chargers, Fault lights, Beeps, No Charge messages

<snip>

Based on our experience we have developed a simple low cost EVSE tester. The ‘EVSE J1772 Tester’ can be built with common low cost parts from eBay. Click here EVSE J1772 Tester & Simulator Product Specification

We are offering the schematic, parts list and layout for the tester at no cost. Click here http://bit.ly/J1772-Tester-DIY ..
The EVDoctor 'EVSE J1772 Tester/Simulator' is available fully assembled on eBay or Amazon.

<snip>
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top