Anyone have an electrical schematic or diagram showing the reverse circuit pin outs and connectors for the car? I'm adding a back up camera and need to determine where I can grab a signal from. I know I can get it back at the backup light for the camera, but I'd like to pick it up in the front somewhere for the monitor. I sent Wopontour a couple of PM's but he must be on vacation or something.
agggilli
Joined
·
4,948 Posts
I've looked into this before for someone. Probably the easiest point to access the back-up lamp output in the interior of the car would be at connector X275 which is located behind the kick panel on the front passenger (RH) side. It's a large (102 cavity) black connector and you will need to locate pin 37 on either side of the connector which should be a light-green and white wire. (see pics)
It's an 18ga wire so you should be able to just "tap" into it with a scotch lock.
HTH
WOT
It's an 18ga wire so you should be able to just "tap" into it with a scotch lock.
HTH
WOT
Attachments
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
