GM Volt Forum banner

Readiness codes OBD2

2563 Views 5 Replies 6 Participants Last post by  turboguy327
My Volt failed inspection due to insufficient data.

I am monitoring the readiness flags now on Torque. Does anybody know what flags need to be "ready". I have no longer "incomplete" test but several that say "unavailable". It that still a fail?
1 - 1 of 6 Posts
Unavailable is not a fail, it means the computer is not performing that test, and never will.
Incompletes are the ones you need to focus on.

And check with your local regulations as to how many incompletes you can have and pass.
And while you're at it, petition them to exempt a vehicle that uses 80%+ less fuel than others on the road :)
(Volts are exempt from emissions tests here, thankfully)
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top