GM Volt Forum banner

Programming 2 Volts to work with 1 remote

1827 Views 6 Replies 7 Participants Last post by  2VoltFamily
Has anyone successfully programmed 2 or even 3 Volts to work with one remote? My immediate family now owns 3 Volts (two 2013's , and a 2014), and I would like to carry one remote that works all 3 cars. I know the mechanical key won't work all 3, but just having one remote that will electrically work with all 3 cars would be a lot easier than carrying 3 remotes. I could swear that I read a post at one time that detailed how to do this, but after hours of searching tonight, I can't find any posts on this subject, other than some comments that it should be possible.
1 - 1 of 7 Posts
The programming process described in the Gen 1 manual is pretty specific that the fob is being programmed to match a new individual key code generated by the car, not the other way around, and the car remembers up to 5 codes that it generated for keys. So this "same key in multiple cars" will never work with the normal key-programming process.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.