GM Volt Forum banner

EVSE charger lock.. is the hole diameter 1/4 or 1/8"?

3151 Views 12 Replies 8 Participants Last post by  Constellation
Is the hole for the lock 1/4", 1/8", or 3/16"?

1 - 2 of 13 Posts
OK, I can't let this one go... WHAT???
There is a hole in the release button of the stock Gen II Volt EVSE vehicle connector where you can insert a small padlock making it impossible to disconnect the EVSE from the vehicle without first removing the lock without breaking something.
Thank you. As a Gen1 owner, I didn't know this about the Gen2. Do many use this feature?
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.