GM Volt Forum banner

Door edge protection: Trim-Lok any good?

Tags
door edge trim
3K views 9 replies 5 participants last post by  quirkySquirt 
The X101 stuff should be ok for your needs, quirkySquirt. I bet it will stay on ok. If you want to give it a little extra holding power, a very thin bead of silicone a caulk or a few spots of hot glue on the backside of the door should do the trick.

Don't use the stuff I the second link for door edges. Just don't. It won't scratch the paint. But you are right. It will look terrible there.

HTH
Steve
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top