GM Volt Forum banner

Dead infotainment screen (and it's COLD)

5132 Views 18 Replies 10 Participants Last post by  QuandAns42
After work, I got in my Volt and the infotainment screen is completely blank (unpowered). The infotainment controls appear to work normally... they are lit up and an audible "click" is heard when they are pressed, I can change driving modes, seat heater controls work. But there is no radio, bluetooth doesn't connect to my phone, etc. Biggest issue is that I cannot control climate, and it's getting cold. I had it on Eco, which isn't cutting it for the polar vortex. Fan speed does change, I assume temp setting does too, but I can't change vents or to Comfort. Cycled car on and off a few times with no change.

Any ideas? Sounds like more than a dead display if bluetooth/radio aren't working. But a dead head unit wouldn't always blank the display (or maybe it would)? It's too cold to randomly check fuses right now, unless I know a specific one. I'll start checking my manuals for that, but appreciate any input.

Edit: fuse F4 (display) looked intact (not blown).
1 - 1 of 19 Posts
I see a lot of mentions here about how expensive it is to work with the dealer... That's true for everything, but these clusters aren't DIY. As mentioned above, they have to be programmed to your VIN and tampering can be illegal. However, it isn't true that the Dealers are the only one's who can program them! I don't know how many independent shops are set up to do the work but instrumentclusterstore.com was totally great to work with and they were able to get me the right cluster for my VIN and transferred all the data from the bad cluster.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top