GM Volt Forum banner

CleanTechnica hasn't reported any (positive) BOLT reviews

2364 Views 12 Replies 10 Participants Last post by  don shaw
CleanTechnica will report the slightest bit of good news about tesla cars, but has said nothing about the positive Bolt reviews from Consumer Reports, Car and Driver, Motor Trend or Forbes.
1 - 2 of 13 Posts
Electrek.co isn't much better

Besides the gm-volt.com front page blog, places like Insideevs and greencar reports seem to have a lot more balance in their reporting and articles without hearty injections of Tesla fanboism (or GM/Bolt/Volt hatred) into every sentence.

JMO
WOT
My impression is that Insideevs and Green Car Reports are just happy to report on anything EV related. They don't seem to show any favoritism that I've seen.
This is what whoever "Ken" is posted to me in the comments section of that "Bolt EV delayed 3 months" BS article:

My original comment: Irresponsible journalism...er, blogging at it's worst.
When GM does indeed deliver Bolts later this year, make sure to post an apology to your readers for misleading them.


"Ken: Wrong. The information about a delay is completely accurate - no preorders until 3 months later than promised and further strong indication that there will be no deliveries to the public until the spring of 2017.

So it is you that should actually apologize."


I'm still waiting for my apology. ;) They actually changed the title of the article first (from "Bolt delayed 3 months" to "Bolt pre-order timing delayed 3 months"), then completely pulled the article outright when it was clear their article was 100% wrong. Lol

Suffice to say, don't expect a "hands on" review of the Bolt by Cleantechnica anytime soon...unless they buy one themselves, as they are now probably on the bottom of the list for media drives. ;)
So, when I take delivery in late November/early December, whom should I send a preliminary review to? :p
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top