GM Volt Forum banner

2013 Instructions on replacing the HVAC fan?

11083 Views 16 Replies 12 Participants Last post by  sheryllee
My heater blower had been problematic for a long time. Sometimes it just refuses to turn on (the heat or AC turns on, but the blower itself doesn't), and lately when it does turn on it seems like its not moving as much air as it used to, and it makes a bit of a whine. In the past week even when its set to a constant speed in the HVAC controls, the actual fan speed waivers quite a bit. I plan to just replace the blower entirely hoping to solve both problems.

My problem is that I haven't been able to find any information on how to actually do this. I've done a lot of work on older cars where you can actually see things, so I'm mechanically inclined, I'm just not sure how you actually get to the thing. I'm guessing since you access the cabin air filter through the back of the glove box, I probably need to replace the glove box door, but other than that vague idea I'm stumped.
1 - 1 of 17 Posts
The take no prisoners approach is to shut the car off, remove all FOBs, and disconnect battery negative. Wait 2 minutes.
WOT
Not that I need to, but is good information to have, what do you mean by "remove all FOBs"? Get the keys far from the car?

thanks.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top