GM Volt Forum banner

l2 evse

  1. Unboxing my Schneider Electric EV230WSR charger!

    Generation 1 Volt (2011-2015)
    Hi, I just wanted to share some pics of my new Schneider Electric EVLink EV230WSR outdoor L2 charging station. Full disclosure, I work for =SE=! I took advantage of an employee discount! On a sad note, the 2014 Volt I ordered in December will not be assembled until the week of February 24 so I...
  2. Voltec 240V L2 EVSE - any interests?

    Generation 1 Volt (2011-2015)
    This was sold shortly after listing - Thanks! I have a Voltec SPX 240V 15A L2 EVSE that was recommended for use with our Volts that I am not using. It has worked flawlessly for over a year but I upgraded to a 40A EVSE to use with my Rav4. I've got it setup as a portable unit with an L6-20 plug...
  3. Buzzing Coulomb Technology CT-500 L2 EVSE replaced by SPX under warranty

    Generation 1 Volt (2011-2015)
    From day one my CT-500 made a slight hum when under load. About six weeks ago it began to intermittently hum/buzz more loudly during charging. The buzz sounds very much like a loose transformer lamination. I contacted SPX who, in turn, contacted Coulomb. Coulomb policy is to replace...
  4. Low Cost DIY SPX L2 EVSE Plug-In Install "Sharing Dryer Outlet" - Instructions & Pics

    Generation 1 Volt (2011-2015)
    Low Cost DIY SPX L2 EVSE Plug-In Install "Sharing Dryer Outlet" - Instructions & Pics Ok, if you’ve followed my other threads you know last weekend I picked up my Volt and also installed my SPX Power Xpress L2 EVSE. My install took about 3hrs and cost me $182 in parts. I could have done it...